Quartz Clock Motor Kit for Wall Clock Continuous Sweep Quartz Clock Movement

Continuous Sweep (Quiet) Clock Movements and Inserts

Virtually silent clock mechanisms bring a new dimension to clock making projects.

Upgrade to silent clock motors with these quality clock motors that run in a sweeping motion, and thus eliminate the stepping sound made by a traditional quartz movement with step second hand. Enjoy years of trouble free operation with these quality clock mechanisms.

Summary: The clock shown above the bed uses a high torque continuous sweep motor, and is mounted to the wall with one of our mounting cups. You also see our vinyl numbers, and 14" clock hands for a 32" diameter clock.

Common Questions

and tips for choosing clock motors and hands

When repairing a clock we always recommend new hands as your old ones may not fit.

What is the difference between High Torque and Standard Quartz Clock movements?

High Torque Clock Motors are more powerful - made specifically to handle the extra weight of longer clock hands up to 18" in length. This means you can make a clock with a clock face/dial that is 42" wide or even greater! Comparatively, standard movements run clock hands up to 4.5 inches long. » Jump to Motors and Hands for Large Clocks
What are the different types of clock movements?

1) USA Made Step Style High Torque Movements These movements will make a very slight stepping sound & motion, but do not drive a second hand.
2) Continuous Sweep Clock Movements drive the longer hands and operate silently + will drive a second hand (see below in red or black, 10 inches long).
3) High Torque Pendulum Movements. With this option you can drive the longer hands as well as a pendulum up to 25" long.
4) High Power Chiming Clock Movements
Tips: AA Battery and C-Cell Options - The C-Cell Simply Lasts Longer. Always use fresh Duracell or Energizer batteries.
How do I choose the right size clock motor & hands?

1) Refer to the figure above, or» Click Here for helpful info (a new window or tab will open)

2)The size of hands is based on the length of the minute hand from the mounting hole to the end of the minute hand. (Figures 3 & 4 above) Most can be slightly trimmed if need be, and they are all USA made of aluminum. Our customers also spray paint them.

3) Our clock motors are sized by the thickness of the dial the movements can go through. EG Q-64 below will go through up to 5/8" thick material. If your material is too thick, consider removing some to in-set the clock. Or if your clock face material is too thin, consider adding some material behind the face so the hands will sit closer to your clock face.
What's included?

Listed price for motors includes the mounting hardware for your clock. (Washers, Nuts, Bolts and Brass End Caps.) Note: Built in hangers as found on standard clock movements are not recommended due to the weight of the clocks you will build. We recommend checking out our selection of Picture Hanging Hardware
Prices for clock hands includes a minute and hour hand. (Sweep 10" second hands sold separately, available for Continuous Sweep motors only)
Inspiration

Our thanks for the photo goes to The Paint Place, Fort Saint John, BC where they run frequent classes that teach painting and clock-making. (We welcome your photos too!) How did they do it? Check out our blog post! Plus here is a DIY Large Wall Clock Summary: The clocks shown use either a High Torque Movement for up to 5/8" thick material (Q-64) or some upgraded to Continuous Sweep Movements (Q-67) - scroll below for the selection. The class offered a selection of clock hands ranging from 8 to 12 inches for these clocks that are 30" diameter (add to cart below). The materials were cut wood and painted. Numbers are painted on.

Join us on Facebook - We are part of an awesome Facebook Group called "Making and Fixing Clocks!" Click here to request to join.
Helpful Videos
Testimonials

High Torque Clock Movements (Up to 5/8" Dial Face)

Happy Customer -- 2017-04-28 Your products were as advertised; was able to use the wheels to finish up the toy cars for the neighbor kids; took the paint and finish without having to seal or prep the wheels. As a pleasant surprise the shipment came two days early. A satisfied customer -- Karleen Stallard

Clock Hands for High Torque Motors 14" Spade Style Black

Fantastic -- 2017-05-08 Love, love, love the clock hands! Even nicer than I anticipated!! Can't wait to see them on the clock that we made. Will definitely order from this company again. -- Anne Belanger

Clock Hands for High Torque Motors 17-3/4", Black Spade Style

Fantastic -- 2017-05-31 The technology and customer care is very good. -- Robin Landrie

USA Made High Torque Clock Movements (Up to 5/8" Dial Face)

Extremely Happy -- 2017-10-12 The clock movement I received for my large wooden clock I made worked very well. I got my package from Bear Woods Supply very quickly and was extremely happy with my purchases. -- CAROLYN AIKEN